The Hartmann grid (the name of the Hartmann line is also used, the coordinate grid, English Hartmann grid) is a hypothetically existing geobiological network on Earth. In accordance with the hypothesis put forward by the German scientist Ernst Hartmann in 1950, this network enmeshes almost the entire surface of the Earth. The nodes of this grid form, according to his hypothesis, geopathogenic zones unfavorable for living organisms. In this case, the size of the cells decreases with distance from the equator and approaching the poles. The Hartmann grid is the most famous of the "existing" "networks" that encircle the Earth, the Wittmann and Kurri networks are less well known. According to the experience of naturopathic physician Fedorich AV: “we know of only one proven method, which by 85-88 percent blocks geopathogenic zones under any external circumstances. This is the presence in the room of a marble floor and a copper roof at the same time …”
It is a coordinate geobiological network. The name of the Hartmann line is also used, the distance between which is about 2.5 meters. Accordingly, the space is marked into squares 2.5 x 2.5 meters. Dimensions may vary depending on terrain. The presence of metal structures, terrain, water bodies, natural resources or other substances and substances that are both underground and on the surface also affect.
The Earth has two different-frequency systems by which a person is guided. The physiological part interacts with the Hartman grid, and the spiritualizing principle interacts with the Kurri ("electrical") grid, located at 45 degrees to the Hatman grid.
The intersection points of the lines form nodes. On the diagonal of the square there are paired nodes of ascending or descending energy flows from the Earth to Space and vice versa. In the direction of the beam, the nodes alternate, replacing one another.
The Hartmann grid is nothing more than the Earth's magnetic lines of force, detectable by dowsing methods, pendulums, frames. Also, this natural phenomenon underlies the orientation of the animal world on the ground.
Promotional video:
Interaction of the animal kingdom with the Hartmann grid
It is on the Hartmann grid that bees, ants, fish and migratory animals are guided. It is perfectly felt by the whole animal world. People have maps divided into squares. Longitude and latitude are used for navigation on a global scale, like on a globe. A natural analogue is the Hartmann geobiomagnetic grid. By recounting squares - nodes and lines - the animals orient themselves in space. Thanks to this, during migration, animals know the way back, because the end point relative to the start point already has its own coordinates.
The body of an animal is predominantly in a horizontal position and constantly interacts with the earth's magnetic field, as a result of which animals have increased plasticity, flexibility, dynamism and energy potential.
The impact of the Hartman grid on humans
The streams of lines of force pass through the legs of a person and enrich the first energy center ("earth" chakra) with "magnetic" energy, organizing the energy flow of the human lymphatic system.
During sleep, a person is in a horizontal position, metabolic processes take place in the body, the body breathes, rests, is saturated with the magnetic energy of the Earth, interacting with the Hartman grid, while the body of dreams leaves the person. The chakras are blown by the energy of the Earth and filled with energy. Therefore, it is of great importance in what position you sleep, where and how. It is not recommended to stay for a long time at the nodes and on the Hartmann grid lines. Accordingly, when arranging furniture in an apartment, as well as when building a house, this must be taken into account.
In the ascending node, the body is enriched with the energy of the Earth's magnetic field and physiology is restored. Accordingly, verticalization of the body (spiritualization) and irradiation with cosmic, subtle vibrations occur in the descending stream. When diving below 5 meters underground, the Hartman grid stops fixing. This may be associated with some specific sensations in people in the subway, tunnels, during significant diving and airplane flights. The body loses its connection with the magnetic grid, and the orientation in space is disturbed.
HARTMAN'S GRID
Answers on questions. S. Babikov
Question: Plasma cords. Hartman Grid, Curry - are they? I understand stable - that is, that they are constantly. But how can the grid be stable with the constant rotation of the planet's core and crust? So there is something else that guides them, like on a notebook in arithmetic. And this is something - not in the planet, and "comes" from the outside?..
To avoid terminological and semantic discrepancies on M. Curry's grid and E. Hartman's grid, I first studied materials from the Internet.
Now I understand why you asked this question - there are many indirect materials describing the external manifestation of the phenomenon and its action, but not the essence. There is no explanation for the very nature of the phenomenon. Whence it follows, why exactly the grid, why it is connected with the Earth, why there are deviations in it, different polarity of zones, why there is a daily "breathing" associated with the rotation of the Earth in relation to the Sun, why the grid and its parameters depend on a specific place, and Why, after all, does human activity influence the local parameters of the grid?
First of all, no, these are not plasma cords, but only their consequences.
I will try to explain to you in more detail, as a humanitarian, and not as a "techie". I think you will understand. I explain it as you will explain to children, from the beginning. Do you know what a wave is in technology? Wave motion? Wave amplitude? Frequency? Wave speed? Wave interference (overlap)?
If a stone is thrown into the flat surface of the water of the pond, then circular waves will go along it in all directions from the point where the stone falls.
The picture will be like this:
Have you seen something like this?
If we look at the surface in section, we will see the following picture:
The waveform will look like a sinusoid.
The upper part of the sinusoid (wave) relative to the pond surface (marked with "0") will be higher - this is conventionally "+" (hump).
The lower part of the sinusoid relative to the pond surface will be higher - this is conventionally "-" (depression).
The point on the surface (red) will oscillate on the wave up and down along the vertical coordinate by the maximum dimension A, remaining in the same place in the horizontal coordinates as it was before the wave. This is the amplitude of the oscillatory motion.
The wave itself will move along the surface of the pond with a speed V - this is the speed of wave motion.
The size of the wave from the beginning of one oscillation to its end is - Wavelength "D".
The time it takes for the wave to travel this distance is the Oscillation Period, and the number of full periods that the wave managed to pass per unit of time, for example, per second, is the oscillation frequency.
Light is also vibrations, only an electron spherical wave, since it emanates from a luminous point in the volume of space, it is characterized by a wavelength (frequency or color), the speed of a light wave in a vacuum, which in our space is about 300,000 km / s (to be precise, then 299792458 ± 1.2 m / s).
And sound is also vibrations, only acoustic waves of compression-rarefaction of the gaseous medium of the atmosphere, which our hearing perceives as sound. Different frequency (wavelength) - different gamma sound from "to" to "si". The speed of sound depends on many factors of the gas environment - composition, pressure (density), humidity, temperature, etc. On average, under normal conditions (temperature +20 C, pressure 760 mm Hg) at the surface of the earth, it is about 330 m / sec.
In liquids and solids, the speed of sound is much higher.
Viton (biological) radiation is also similar to light radiation of a spherical wave of electron radiation (light), but its speed in our space is 4C (four speeds of light).
If there are two or more sources of identical wave oscillations, then during the propagation of waves, they may overlap when they meet - interference.
The picture will be something like this:
If we look at the section, then at the points of overlapping waves we will see the following:
The wavelength did not change, but the amplitude increased - there was a superposition of waves - as the “humps” grew, so the “troughs” became deeper. If the parameters are the same, then a so-called "STANDING WAVE" is formed, in which the waves continue their motion, but in the places of their overlap a stationary zone of their increased amplitude (radiation intensity) is formed, which creates a characteristic pattern of interference. After all, it is these pictures of stationary zones of increased radiation intensity that are recorded as an interference pattern.
These are the simplest cases to explain. In reality, the picture is much more complicated - there are spherical waves, and of different amplitudes, frequencies, etc., etc., etc.
Now imagine that the core of the planet is radiating energy. All of it goes into its environment, primarily to the spherical shell of the planet's crust. Part of it is transmitted in the form of high-frequency electromagnetic plasma filaments, which give the planet's magnetic field and an orderly rotation of its crustal shell around the core. However, this rotation has no material "axes" - the energy source (core) is spherical, and the shell is spherical, freely rotates around the core in a state of dynamic equilibrium of rotation parameters.
The tilt of the planet's axis at 23 degrees relative to the plane of the ecliptic is only the tilt of its crust, not the core, whose axis of rotation is perpendicular to the plane of the planet's revolution around the Sun. And this crustal tilt is caused by the resultant of all electromagnetic forces rotating the shell. The fact is that the shell of the crust is uneven in its composition - there are continental slabs of granite and similar crystalline rocks, basalt and the like, and oceanic ones - only of basalt. The crust is uneven in its structure - the oceanic plates are relatively thin (6-16 km), and the continental plates are thick, up to 70 km, especially under the mountains, and it is also uneven both in shape and in the geographical location of the continents themselves. And the mainland rocks are different,have different parameters of electrical conductivity and electrical resistance - especially in places of deposits of metal ores (there are even deposits of native copper, where giant metal ingots of 98% red copper lie at a shallow depth, for example, in Taimyr, near Norilsk).
There are also faults in the earth, along which radiations of the core of the Viton spectrum emerge, for which our matter is relatively transparent, however, the total and local transparency of the earth's crust for Viton radiation is far from uniform. And again, everything here depends on the thickness and material of the crust, faults, the presence in the crust of zones of increased wave conductivity, such as, for example, vents of ancient volcanoes filled with frozen rock. There are often biological "anomalies", and by the circular shape of these "anomalies" one can unequivocally determine the places of ancient volcanoes, no matter how they are covered by kilometer-long sedimentary rocks. With all the relative "transparency" for Viton radiation, our matter also refracts it, and partially reflects it according to the laws of wave optics.
Now imagine that a beam of light is launched into a semi-transparent and partially reflective sphere with a circumference of 40,000 km. A ray of light will have time 7.5 times per second, and that of viton radiation - 30 times around this sphere, repeatedly experiencing refraction and interference of radiation.
Since it is a sphere, and light travels in all directions, along and across, sooner or later all radiation will come to an equilibrium state, in which its interference pattern on the inner sphere of the Earth's crust will give a Grid of "STANDING" RADIATION WAVES.
This network of "standing" waves formed on the crust, and, naturally, is "attached" to it and rotates with the crust. And on this grid, the nodes of "standing" waves will create not only a rectangular grid, but also a diagonal one. And for this grid, the Earth's crust is almost transparent.
Now let's figure it out - what kind of radiation form the Hartmann grid?
Visible light? No. The earth is opaque to visible light, just like rocks. The light from the core will not pass through the crust. If it were light, then the entire surface of the planet would be in light squares, it would glow. And this is not. So, definitely - not light.
A magnetic field? Again, unlikely - then every three meters, as it turns out on the Hartman grid, the magnetic needle would do somersaults, but she is calm. This means that the magnetic field has nothing to do with it.
Electric or electrostatic field? Again, no - then the Hartmann grid could be easily determined with ordinary electrical measuring instruments, but they are powerless here.
So what is it?
This field of viton radiation is determined only by biolocation methods, and affects only wildlife. Moreover, the version of the interference of Viton radiation on the inner surface of the sphere of the Earth's crust is also confirmed by the fact that it is not equally intense along the main azimuths - in the south, the average intensity of Viton radiation is three times higher than along the rest of the cardinal points.
In addition, my theory of the structure of the Earth directly speaks of a 77-meter "cotton" layer of ash that underlies the planet's crust from the inside, just at the border of the solid crust and the gas mantle - this is just the zone of multiple reflection, refraction and interference of Viton radiation. Look in the book.
Now again turn your attention to the schematic drawing of a "standing" wave - the upper half-wave ("hump") has a plus sign "+", and the lower ("trough") has a minus sign "-". In the same way, the Hartman grid - the zone of positive "standing" viton wave gives a right-sided torsion viton field according to the "+" sign, useful to a person, and a negative "depression" - a left-side torsion field, harmful to a person.
Understood?
However, the rectangular Hartman grid has a peculiarity - the Hartman grid is oriented to the cardinal points. Each of its cells is represented by two stripes - shorter (from 2.1 to 1.8 m; on average 2 m), directed to the north-south, and longer (from 2.25 to 2.6 m; on average 2, 5 m), facing east-west.
What is it that stretches the mesh from west to east? The influence of the rotating magnetic field of the Earth, since the magnetic field is similar to the viton one in terms of torsion features, only the frequencies are different.
Why is it similar?
Let's figure it out.
All this is in my book and articles, so I explain briefly, the very essence.
Our space and its matter have the main distinctive feature - it is TWO-vector in the direction of torsional motion (rotation) of its particles in two spatial axes (planes). The atoms of matter in our space have a nucleus consisting of protons and neutrons (hadrons), and an orbital particle revolving around the nucleus - ELECTRON (lepton). The radiation of our space - electronic - appears in the form of a quantum of energy released / absorbed during the transition of an electron from one energy orbital level to another. They are also characterized by a TWO-vector torsion field of an electron, i.e. when an electron simultaneously rotates along two spatial axes.
Our biology of the water-carbon form of life consists of the matter of our space, but it receives energy for its vital activity mainly from the radiations of the higher, Yellow space, 6 times more energy-intensive than ours, and exchanges its radiation with the Yellow space. The use of energy and radiation from a higher space is the main feature of biological Life. The radiation of a living organism is also called an aura.
What is the characteristic of such radiation?
Spaces with the highest energetics, their matter and radiation are also called “thin” ones. All spaces and their matter are built according to a single similarity feature, so it will not be difficult to understand.
Yellow space and its matter have the main distinguishing feature - it is THREE-vector in the direction of torsional motion (rotation) of its particles in two spatial axes (planes). Atoms of matter in the Yellow space have a nucleus, consisting of electrons and positrons (hadrons), and an orbital particle revolving around the nucleus - VITONA (lepton). Radiation of the Yellow space is viton, arises in the form of a quantum of energy released / absorbed during the transition of viton from one energy orbital level to another. They are also characterized by a three-vector Viton torsion field, i.e. when Viton simultaneously rotates along three spatial axes.
I would like to draw your attention to a very important detail - the delusion of our science: visible light and radiation from our space are often called electromagnetic. This is not true, this is a mistake! These emissions are electronic, but by no means electromagnetic.
It is necessary to understand the fundamental difference between electronic and electromagnetic radiation: visible light and radiation (thermal and radio waves, for example) are ELECTRONIC radiation, because they have only a two-vector torsion field.
The movement of such radiation (beam of light) and electric current along the conductor is similar - it does not generate magnetic force. This is clearly seen from Faraday's laws of electromagnetic induction. In order for a magnetic force to appear, two-vector radiation (light, electric current) must be given rotation along the third axis, i.e. to give the properties of three-vector radiation - just send radiation along a coil or coil.
This statement can be easily verified by simple experience:
1. Pass a beam of a sufficiently powerful laser (so that the resulting magnetic force can be measured by the instrument) through a straight non-magnetic and transparent optical waveguide. For example, on a polished plexiglass rod or fiber-optic conductor.
There will be no magnetic force, and the magnetic needle near the waveguide will not deflect. So how can we call radiation "electromagnetic" here?
2. Roll the waveguide into a ring (coil) and pass light through it again. A magnetic force will appear - the magnetic needle near the waveguide coil will deflect. So much for electromagnetic radiation. But all materials are non-magnetic …
The experiment can be repeated near the radiating aluminum or copper rod (wire) of the radio station. As long as the rod is straight, there will be no magnetic force and the magnetic needle will not deviate, no matter how much the station works "in transmission". So where is the electromagnetic radiation from a radio wave?
But as soon as you roll this rod (wire) into a ring (coil), the magnetic force will appear, and the magnetic needle will come to life.
Thus, the same electronic torsion-two-vector radiation became electromagnetic, i.e. torsion-three-vector, or electromagnetic.
That's the difference.
Now you yourself understand that electromagnetic radiation is similar to Viton radiation - in fact, electromagnetic radiation can still be called “pseudo-Vitonic”, and therefore it is biologically active. Therefore, the magnetic field acts on the Viton, and the electromagnetic force on the living, as well as the Viton radiation of a lower frequency.
It is also obvious that high-frequency radiation penetrating through the rock is similar in its properties to high-frequency electric currents in terms of propagation in a conductor, i.e. concentrates directly at the surface of the conductor. The law of similarity is the same in nature. And if a high-frequency current flows over the surface of the wire, then high-frequency viton radiation is concentrated precisely in the upper part of the earth's crust, in a 12-meter layer of tens of kilometers of thickness of the continental plate. Below the grid is not registered.
So, we figured it out …
I think now it is easy for you to understand that when it passes through the rocks of the earth's crust, viton radiation undergoes distortions from the influence of both the material of the rocks themselves and the presence of voids, cracks, water, etc. In other words, viton radiation along the Hartmann grid carries information on the composition and structure of these rocks, and this information can be read by dowsing methods.
In the same way, it is refracted in buildings and structures, which must be taken into account by architects when designing buildings, especially residential ones, and builders when "binding" the coordinates of future construction on the ground.
And to understand the nature of the daily "breathing" of the Hartmann grid is not at all difficult, since you have understood its nature: the Sun is also a source of Viton radiation, and the Hartmann grid is simply obliged to respond to it by increasing its values in terms of radiation intensity.
I think there is no point in explaining the differences in the Curry grid - children at school know the difference between the leg and the hypotenuse of a triangle, and they will figure out this difference in the grids themselves.
If you want, then in addition, there is a lot of information on the Hartman and Curry grids on the Internet - they write who is in what, but more about the practical application of the phenomenon.
Y. Babikov